View MXL8-PW30-0000_8591051.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

luxeon mid-power 5630 ds201 ?2013 philips lumileds lighting company. key product attributes: ? high effcacy for sustainable design ? widely adopted 5630 package ? minimum 80 cri for quality indoor lighting ? ansi compliant 1/6th color binning key applications ? indoor area lighting ? downlight ? outdoor ? architecture ? high bay & low bay luxeon 5630 mid-power leds illumination portfolio introduction luxeon ? 5630 delivers optimized performance in combination with quality of light needed for distributed light source applications. in addition to delivering specifed correlated color temperature and color rendering combinations, these emitters deliver the effcacy and lumen output required by the indoor illumination markets. this document contains the performance data needed to design and engineer applications based on luxeon 5630 emitters.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. i table of contents general information 2 product nomenclature 2 product selection 3 optical characteristics 3 electrical characteristics 4 absolute maximum ratings 4 jedec moisture sensitivity 4 refow soldering characteristics 5 mechanical dimensions 6 pad confguration 7 solder pad design 7 relative spectral distribution 8 light output characteristics 9 luminous effcacy characteristics 10 forward current characteristics 10 current derating curves 11 typical radiation patterns 12 emitter pocket tape packaging 14 emitter reel packaging 15 product binning and labeling 16 luminous flux bins 16 forward voltage bins 17 color bin structure 18
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 2 general information product nomenclature luxeon mid-power emitters are tested and binned at 100 ma, with current pulse duration of 20 ms. all characteristic charts where the thermal pad is kept at constant temperature (25oc typically) are measured with current pulse duration of 20 ms. the part number designations for the mxl8 series is explained as follows: m x l a - b c d e - i j k l where: a designates minimum cri performance (value 7 = 70 minimum and 8 = 80 minimum) b designates radiation pattern (value p = lambertian) c designates color (value w = white) d & e designates nominal ansi cct (for example, 30 = 3000k and 40 = 4000k) i, j, k & l designates additional part numbers therefore products in this series with minimum cri value of 80, cct of 4000k will have the part numbering scheme: m x l 8 - p w 4 0 average lumen maintenance characteristics lumen maintenance for solid-state lighting devices (leds) is typically defned in terms of the percentage of initial light output remaining after a specifed period of time. environmental compliance philips lumileds is committed to providing environmentally friendly products to the solid-state lighting market. luxeon mid-power leds are compliant to the european union directives on the restriction of hazardous substances in electronic equipment, namely reach and the rohs directive. philips lumileds will not intentionally add the following restricted materials to these leds: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (pbb) or polybrominated diphenyl ethers (pbde).
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 3 product selection product selection for mid-power leds thermal pad temperature = 25c, test current = 100 ma table 1. nominal cct part number minimum cri typical cri typical r9 minimum luminous flux (lm) f v typical luminous flux (lm) f v 2700k mxl8-pw27-0000 80 82 20 28 32 3000k MXL8-PW30-0000 80 82 20 30 33 3500k mxl8-pw35-0000 80 82 20 30 34 4000k mxl8-pw40-0000 80 82 20 32 34 5000k mxl8-pw50-0000 80 82 20 32 35 5700k mxl8-pw57-0000 80 82 20 32 35 6500k mxl8-pw65-0000 80 82 20 32 36 note for table 1: 1. philips lumileds maintains a tolerance of 7.5% on luminous fux and 2 on cri measurements. optical characteristics optical characteristics of mid-power leds thermal pad temperature = 25c, test current = 100 ma table 2. nominal cct color temperature cct typ total included angle [1] (degrees) u 0 90v typ viewing angle [2] (degrees) 2 u 1/2 minimum typical maximum 2700k 2550k 2700k 2850k 160 120 3000k 2850k 3000k 3200k 160 120 3500k 3200k 3500k 3750k 160 120 4000k 3750k 4000k 4250k 160 120 5000k 4700k 5000k 5300k 160 120 5700k 5300k 5700k 6000k 160 120 6500k 6000k 6500k 7000k 160 120 notes for table 2: 1. total angle at which 90% of total luminous fux is captured. 2. viewing angle is the off axis angle from lamp centerline where the luminous intensity is ? of the peak value.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 4 electrical characteristics electrical characteristics of mid-power leds thermal pad temperature = 25oc, test current = 100 ma table 3. part number forward voltage v f [1] (v) typ temperature coeffcient of forward voltage [2] (mv/c) d v f / d t j typical thermal resistance junction to thermal pad (c/w) r u j-c minimum typical maximum mxl8-pw27-0000 MXL8-PW30-0000 mxl8-pw35-0000 mxl8-pw40-0000 mxl8-pw50-0000 mxl8-pw57-0000 mxl8-pw65-0000 2.90 3.10 3.40 -2.0 to -4.0 24 notes for table 3: 1. philips lumileds maintains a tolerance of 0.10v on forward voltage measurements. 2. measured at t j between 25c and 110c. absolute maximum ratings table 4. parameter maximum performance dc forward current (ma) 150 peak pulsed forward current (ma) 150 esd sensitivity class 3a human body model class c machine model led junction temperature [1] 115c operating case temperature at 100 ma -40c - 80c storage temperature -40c - 100c soldering temperature jedec 020b 260c allowable refow cycles 3 reverse voltage (vr) [2] -5v notes for table 4: 1. proper current derating must be observed to maintain junction temperature below the maximum. 2. luxeon mid-power leds are not designed to be driven in reverse bias. jedec moisture sensitivity table 5. level floor life soak requirements standard time conditions time conditions 3 168h [ 30c / 60% rh 192h + 5 / - 0 [ 30c / 60% rh
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 5 refow soldering characteristics 0 50 100 150 200 250 300 05 0 100 1502 00 250 300 t emp er at ur e ( c) ti me (s econds ) t l : 217 c 245 c 5 c 260 c +0 /- 5 c t p : 255 c t c : 240 c 235 c +5 /- 0 c ma xi mu m re f low prof ile re co mmended re fl ow prof il e mi nimu m re fl ow pro fi le 120 se c ond s, ma x. 100 se co nd s, ma x 30 se co nd s, ma x. 10se c. ,m in . t sm ax : 200 c t sm in : 150 c temperature prole for table 6. table 6. reow prole in accordance with j-std-020b. profle feature lead free assembly preheat/soak : temperature min (t smin ) temperature max (t smax ) maximum time (t s ) from t smin to t smax 150c 200c 120 seconds ramp-up rate (t l to t p ) 3c / second liquidous temperature (t l ) 217c maximum time (t l ) maintained above t l 100 seconds maximum peak package body temperature (t p ) 260c time (t p ) within 5c of the specifed temperature (t c ) 30 seconds maximum ramp-down rate (t p to t l ) 6c / second maximum time 25c to peak temperature 8 minutes note for table 6: 1. all temperatures refer to the application printed circuit board (pcb), measured on the surface adjacent to the package body.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 6 mechanical dimensions notes for figure 1: 1. all dimensions are in millimeters. 2. drawings not to scale. figure 1. package outline drawing.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 7 pad confguration note for figure 2: 1. the thermal pad is electrically isolated from the anode and cathode contact pads. solder pad design notes for figure 3: 1. the drawing above shows the recommended solder pad layout on printed circuit board (pcb). 2. application brief ab201 provides extensive details for this layout. pad function 1 cathode 2 anode 3 thermal 4 open figure 2. pad confguration. 1.1 5.9 2.2 figure 3. solder pad layout.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 8 relative spectral distribution relative intensity vs wavelength for mxl8-pwxx-0000 figure 4. typical color spectrum of mxl8-pwxx-0000 emitter, integrated measurement at thermal pad temperature = 25c, current = 100 ma.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 9 light output characteristics relative flux over temperature for mxl8-pwxx-0000 relative flux vs forward current for mxl8-pwxx-0000 1.60 1.20 0 80 f lux 0 . 80 relative f 0.40 0.00 0 25 50 75 100 125 150 0 25 50 75 100 125 150 forward current (ma) figure 6. typical relative luminous fux vs. forward current, thermal pad temperature = 25oc. 120% 100% 80% ux 60% r elative fl 40% r 0% 20% 0% 10 25 40 55 70 85 100 115 junction temperature ( ? c) figure 5. typical relative light output vs. thermal pad temperature, forward current = 100 ma.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 10 luminous effcacy characteristics relative luminous effcacy vs forward current for mxl8-pwxx-0000 forward current characteristics forward current vs forward voltage for mxl8-pwxx-0000 150 125 c y (l%) 100 u s effica c 50 75 e lumino u 25 50 relativ e 0 25 0 25 50 75 100 125 150 forward current (ma) figure 7. typical emitter effcacy versus forward current, thermal pad temperature = 25c. 150 125 100 nt (ma) 50 75 ard curre 25 50 forw 0 2.00 2.25 2.50 2.75 3. 00 3.25 3.50 3.75 4.00 forward voltage (v) figure 8. typical forward current vs. forward voltage, thermal pad temperature = 25c.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 11 current derating curves maximum dc current vs ambient temperature at different rth j-air for mxl8-pwxx-0000 175 200 125 150 175 r ent (ma) rth j-air =200oc/w 50 75 100 125 m um forward current ( m rth j-air =100oc/w rth j-air =50oc/w rth j-air =150oc/w rth j-air =200oc/w 0 25 50 maximum f rth j -a i r = 50oc/w 0 0 20 40 60 80 100 ambient temperature (c) figure 9. maximum forward current vs. ambient temperature, based on t jmax = 115oc, forward voltage = 3.5v.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 12 typical radiation patterns radiation pattern in cartesian coordinate system radiation pattern in polar coordinate system 1.2 1.0 0.8 t ensity 04 0.6 r elative in t 02 0 . 4 r 0.0 0 . 2 0.0 -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 angle (degree) figure 10. typical representative spatial radiation pattern. figure 11. typical polar plot of radiation pattern.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 13 color shift vs viewing angle 0 05 0.06 0.04 0 . 05 dx dy 0.03 x , dy 0.02 d x 0.00 0.01 -0.01 0.00 -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 angle (degree) figure 12. typical plot of color shift vs. viewing angle.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 14 emitter pocket tape packaging notes for figure 13: 1. all dimensions are in millimeters 2. empty component pockets sealed with top cover tape 3. the maximum number of consecutive missing leds is two. figure 13. emitter pocket tape packaging.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 15 emitter reel packaging notes for figure 14: 1. all dimentions are in millimeters. 2. empty component pockets sealed with top cover tape. 3. 7 inch reel-1500 pieces per reel. 4. minimum packing quantity is 500 pieces. 5. the maximum number of consecutive missing leds is two. 6. in accordance with eia-481-1-b specifcation. figure 14. emitter reel packaging.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 16 product binning and labeling purpose of product binning in the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. for this reason, philips lumileds bins the led components for luminous fux, color and forward voltage (v f ). decoding product bin labeling luxeon mid-power emitters are labeled using a four digit alphanumeric code (cat code) depicting the bin values for emitters packaged on a single reel. all emitters packaged within a reel are of the same 3-variable bin combination. using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. reels of 3000k, 3500k, 4000k, 5000k, 6500k emitters are labeled with a four digit alphanumeric cat code following the format below. a b c d a = flux bin (l etc.) b & c = color bin (for example 51, 52, 53, 54, 55, 56) d = v f bin luminous flux bins table 7 lists the standard photometric luminous fux bins for luxeon mid-power emitters (tested and binned at 100 ma). although several bins are outlined, product availability in a particular bin varies by production run and by product performance. not all bins are available in all colors. table 7. flux bins bin code minimum photometric flux (lm) maximum photometric flux (lm) k 28 32 l 32 36 m 36 40 tested and binned at 25c, if = 100 ma tester tolerance +- 7 5%
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 17 forward voltage bins table 8. v f bins bin code minimum forward voltage (v) maximum forward voltage (v) v 2.9 3.0 w 3.0 3.1 x 3.1 3.2 y 3.2 3.3 z 3.3 3.4 notes for table 8: 1. tested and binned at 25c, if = 100 ma. 2. tester tolerance +, - 0.1v.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 18 color bin structure mxl8-pw27-0000 color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 9. luxeon mid-power ansi 1/6 color bin coordinates for mxl8-pw27-0000 emitter bin code x y bin code x y 81 0.4625 0.4729 0.4813 0.4703 0.4113 0.4299 0.4319 0.4130 84 0.4446 0.4546 0.4625 0.4520 0.3910 0.4095 0.4113 0.3927 82 0.4520 0.4625 0.4703 0.4593 0.3927 0.4113 0.4132 0.3944 85 0.4468 0.4562 0.4646 0.4546 0.4077 0.4260 0.4280 0.4095 83 0.4546 0.4646 0.4729 0.4625 0.4095 0.4280 0.4299 0.4113 86 0.4373 0.4468 0.4546 0.4446 0.3893 0.4077 0.4095 0.3910 note for table 9: 1. tested and binned at 25c and lf = 100 ma. tester tolerance: +/- 0.01 in x and y coordinates. 0.450 0.430 0.440 0.450 0.400 0.410 0.420 0.430 y 85 82 81 83 84 86 2700k 0.380 0.390 0.400 82 84 86 2580 2870k 0.370 0 . 380 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 0.470 0.475 0.480 0.485 0.490 x figure 15. ansi 2700k 1/6th color bin structure.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 19 MXL8-PW30-0000 color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 10. luxeon mid-power ansi 1/6 color bin coordinates for MXL8-PW30-0000 emitter bin code x y bin code x y 71 0.4386 0.4474 0.4562 0.4468 0.4048 0.4228 0.4260 0.4077 74 0.4222 0.4305 0.4386 0.4298 0.3840 0.4019 0.4048 0.3867 72 0.4298 0.4386 0.4468 0.4373 0.3867 0.4048 0.4077 0.3893 75 0.4223 0.4299 0.4387 0.4305 0.3990 0.4165 0.4197 0.4019 73 0.4305 0.4387 0.4474 0.4386 0.4019 0.4197 0.4228 0.4048 76 0.4147 0.4223 0.4305 0.4222 0.3814 0.3990 0.4019 0.3840 note for table 10: 1. tested and binned at 25c and lf = 100 ma. tester tolerance: +/- 0.01 in x and y coordinates. 0.435 0.445 0.425 0.415 3000k 75 71 73 0.395 0.405 y 3000k 72 74 0.385 0.395 74 76 2870k 0.375 3200k 0.365 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 x figure 16. ansi 3000k 1/6th color bin structure.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 20 mxl8-pw35 color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 11. luxeon mid-power ansi 1/6 color bin coordinates for mxl8-pw35 emitter bin code x y bin code x y 61 0.4130 0.4198 0.4299 0.4223 0.3944 0.4115 0.4165 0.3990 64 0.3975 0.4036 0.4130 0.4061 0.3731 0.3898 0.3944 0.3773 62 0.4061 0.4130 0.4223 0.4147 0.3773 0.3944 0.3990 0.3814 65 0.3943 0.3996 0.4097 0.4036 0.3853 0.4015 0.4065 0.3898 63 0.4036 0.4097 0.4198 0.4130 0.3898 0.4065 0.4115 0.3944 66 0.3889 0.3943 0.4036 0.3975 0.3690 0.3853 0.3898 0.3731 note for table 11: 1. tested and binned at 25c and lf = 100 ma. tester tolerance: +/- 0.01 in x and y coordinates. 0 420 0.430 0.410 0 . 420 0.400 61 63 0.390 y 3500k 65 62 0.380 64 66 3250k 0.370 3750k 0.360 0.380 0.385 0.390 0.395 0.400 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 x figure 17. ansi 3500k 1/6th color bin structure.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 21 mxl8-pw40 color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 12. luxeon mid-power ansi 1/6 color bin coordinates for mxl8-pw40 emitter bin code x y bin code x y 51 0.3869 0.3916 0.4006 0.3952 0.3829 0.3987 0.4044 0.3880 54 0.3746 0.3786 0.3869 0.3822 0.3624 0.3777 0.3829 0.3670 52 0.3822 0.3869 0.3952 0.3898 0.3670 0.3829 0.3880 0.3716 55 0.3703 0.3736 0.3826 0.3786 0.3726 0.3874 0.3931 0.3777 53 0.3786 0.3826 0.3916 0.3869 0.3777 0.3931 0.3987 0.3829 56 0.3670 0.3703 0.3786 0.3746 0.3578 0.3726 0.3777 0.3624 note for table 12: 1. tested and binned at 25c and lf = 100 ma. tester tolerance: +/- 0.01 in x and y coordinates. 0.410 0.420 0.400 0.390 51 53 55 0.370 0.380 y 4000k 52 54 55 0.360 3750k 56 0.350 4250 k 0.340 0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410 x figure 18. ansi 4000k 1/6th color bin structure.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 22 mxl8-pw50 color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 13. luxeon mid-power ansi 1/6 color bin coordinates for mxl8-pw50 emitter bin code x y bin code x y 31 0.3479 0.3493 0.3551 0.3533 0.3580 0.3712 0.3760 0.3624 34 0.3416 0.3425 0.3479 0.3465 0.3408 0.3536 0.3580 0.3448 32 0.3465 0.3479 0.3533 0.3515 0.3448 0.3580 0.3624 0.3487 35 0.3371 0.3376 0.3434 0.3425 0.3493 0.3616 0.3664 0.3536 33 0.3425 0.3434 0.3493 0.3479 0.3536 0.3664 0.3712 0.3580 36 0.3366 0.3371 0.3425 0.3416 0.3369 0.3493 0.3536 0.3408 note for table 13: 1. tested and binned at 25c and lf = 100 ma. tester tolerance: +/- 0.01 in x and y coordinates. 0 380 0.390 0.370 0 . 380 0.360 35 31 33 0.350 y 5000k 35 32 34 4750 k 0.340 5250k 36 0.330 5250k 0.320 0.325 0.330 0.335 0.340 0.345 0.350 0.355 0.360 0.365 x figure 19. ansi 5000k 1/6th color bin structure.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 23 mxl8-pw57 color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 14. luxeon mid-power ansi 1/6 color bin coordinates for mxl8-pw57 emitter bin code x y bin code x y 21 0.3319 0.3320 0.3376 0.3371 0.3446 0.3565 0.3616 0.3493 24 0.3270 0.3267 0.3319 0.3318 0.3285 0.3399 0.3446 0.3327 22 0.3318 0.3319 0.3371 0.3366 0.3327 0.3446 0.3493 0.3369 25 0.3215 0.3207 0.3263 0.3267 0.3353 0.3462 0.3513 0.3399 23 0.3267 0.3263 0.3320 0.3319 0.3399 0.3513 0.3565 0.3446 26 0.3222 0.3215 0.3267 0.3270 0.3243 0.3353 0.3399 0.3285 note for table 14: 1. tested and binned at 25c and lf = 100 ma. tester tolerance: +/- 0.01 in x and y coordinates. 0.340 0.350 0.360 0.370 y 5700k 25 22 21 23 24 26 5250k 0.310 0.320 0.330 0.310 0.315 0.320 0.325 0.330 0.335 0.340 0.345 0.350 x 6000k figure 20. ansi 5700k 1/6th color bin structure.
lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. 24 mxl8-pw65 color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 15. luxeon mid-power ansi 1/6 color bin coordinates for mxl8-pw65 emitter bin code x y bin code x y 11 0.3158 0.3146 0.3206 0.3213 0.3317 0.3422 0.3481 0.3371 14 0.3119 0.3103 0.3158 0.3170 0.3162 0.3263 0.3317 0.3212 12 0.3170 0.3158 0.3213 0.3221 0.3212 0.3317 0.3371 0.3261 15 0.3048 0.3028 0.3087 0.3103 0.3209 0.3304 0.3363 0.3263 13 0.3103 0.3087 0.3146 0.3158 0.3263 0.3363 0.3422 0.3317 16 0.3068 0.3048 0.3103 0.3119 0.3113 0.3209 0.3263 0.3162 note for table 15: 1. tested and binned at 25c and lf = 100 ma. tester tolerance: +/- 0.01 in x and y coordinates. 0 355 0.365 0.345 0 . 355 0.335 11 13 0.325 y 6500k 15 12 14 6000k 0.315 7000k 16 0.305 7000k 0.295 0.290 0.295 0.300 0.305 0.310 0.315 0.320 0.325 0.330 0.335 x figure 21. ansi 6500k 1/6th color bin structure. roh s compliant
company information philips lumileds is a leading provider of leds for everyday lighting applications. the companys records for light output, effcacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology and enabling lighting solutions that are more environmentally friendly, help reduce co2 emissions and reduce the need for power plant expansion. philips lumileds luxeon ? leds are enabling never before possible applications in outdoor lighting, shop lighting, home lighting, digital imaging, display and automotive lighting. philips lumileds is a fully integrated supplier, producing core led material in all three base colors, (red, green, blue) and white. philips lumileds has r&d centers in san jose, california and in the netherlands, and production capabilities in san jose, singapore and penang, malaysia. founded in 1999, philips lumileds is the high fux led technology leader and is dedicated to bridging the gap between solid-state technology and the lighting world. more information about the companys luxeon led products and solid-state lighting technologies can be found at www philipslumileds com. lumileds 5630 datasheet ds201 20130228 ?2013 philips lumileds lighting company. all rights reserved. luxeon is a registered trademark of the philips lumileds lighting company in the united states and other countries. www philipslumileds com www philipslumileds cn com philips lumileds lighting company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. although philips lumileds lighting company has attempted to provide the most accurate information and data, the materials and services information and data are provided as is and philips lumileds lighting company neither warranties, nor guarantees the contents and correctness of the provided information and data. philips lumileds lighting company reserves the right to make changes without notice. you as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.

▲Up To Search▲

Price & Availability of MXL8-PW30-0000

	To Download MXL8-PW30-0000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .